A brush cutter is a handy device that helps to cut grass, weeds, shrubs, and other unnecessary plants. A brush cutter saves time and energy of a person as compared to manual cutting. Nevertheless, brush cutters can face some issues due to continuous use or misuse by a person.
Common Problems & Solutions
- Brush Cutter Won’t Start
One of the most frequent difficulties is when the engine does not start. The reasons behind this could be either old fuel, fuel mixture is wrong, there is a clogged fuel filter, or a bad spark plug.
Solution : Check the amount of fuel and add the new one as recommended by the manufacturer. Look at the spark plug and change it if it is bad. Check the fuel filter for obstruction.
- Engine Stops During Operation
In case your brush cutter starts and stops after a couple of minutes, there might be restricted fuel or air flow. If the brush cutter’s air filter is dirty, the engine will not have adequate air.
Solution: The air filter should be cleaned on a regular basis. Also, make sure that there are no obstructions in the fuel line and filter.
- Poor Cutting Performance
The cutting mechanism of the brush cutter will not be able to chop the grass if the cutting blade or nylon cord is old, damaged, or improperly attached.
Solution: Check the cutting mechanism before operating the tool. If the blade is worn out, get it sharpened or replaced, and do the same with worn out nylon cord.
- Excessive Vibration
Vibration may result from damage, imbalance, or incorrect fitting of the blade. Loose parts may also lead to vibrations.
Solution: First shut down the machine, then check on the blade and the cutting head for any loose parts that need tightening or damaged parts that should be replaced.
- Overheating
The above problem might result from misuse, dirty air vents, or dirty engine compartment.
Solution: It is advisable to let the brush cutter cool down after operating it for long hours. One needs to clear up the cooling vents and remove any grass or dirt.
Conclusion
Good maintenance can prevent most of the problems that come up with brush cutters. This includes checking filters, the cutting head, using fresh fuel, and performing a pre-operation check on the machine. In situations where this does not solve the problem, then maintenance should be done by professionals.
Read More: How to Maintain an Agriculture Sprayer for Better Performance
